
Die XT-60 Steckverbinder von Amass® sind für den Hochstromeinsatz vor allem im Modellbau ausgelegt. Mit den Steckverbindern können z.B. sichere und stabile Akku-Anschlüsse in Gehäusen realisiert werden. Das macht den Umgang mit Lipos ein Stückchen sicherer. Die Einbaubuchse XT-60BE-F kann durch die mitgelieferte Schutzkappe bei Nichtverwendung geschützt werden. Für den XT-60H Stecker liegt ebenfalls eine Schutzkappe bei. Bei Verwendung der Schutzkappe brauchen Sie die Lötstellen nicht mit Schrumpfschlauch zu isolieren. Gleichzeitig dient die Schutzkappe auch als Knickschutz und verhindert so zuverlässig das Brechen von Lötstellen und Kabeln. Die Schutzkappe rastet sicher und stabil am Stecker ein. Es muss also nichts geklebt werden.
Zwei passende Schrauben und Muttern gehören bereits zum Lieferumfang. Die Schrauben können vollständig eingedreht werden. Die Schraubenköpfe stoßen also nicht an. Die genauen Maße entnehmen Sie bitte den Fotos.
AMASS® ist bekannt als Hersteller sehr hochwertiger Steckverbinder.
Lieferumfang:
1 Stück XT-60BE-F Einbaubuchse (vergoldete Kontakte) mit Lötanschluss
1 Stück Schutzkappe für XT-60BE-F
1 Stück XT-60H Stecker (vergoldete Kontakte) mit Lötanschluss
1 Stück Schutzkappe für XT-60H
2 Stück Senkkopfschrauben
2 Stück Muttern
Technische Daten:
Lochabstand: 25,4mm
Setgewicht: ca. 15g
Farbe/Material: orangefarbenes PA-Nylon
Kontakte: Kupferkern, vergoldet
RoHS-Konform: Ja
Kontaktwiderstand: 0,4mΩ
Isolationswiderstand: 2000MΩ
Flammfestigkeit: UL94 V0
Nennspannung: max. DC 500V
Nennstrom: max. 30A
Spitzenstrom: max. 60A für 1 Minute
Steckzyklen: 1000mal
Empf. Löttemperatur: ~480°C
Lagertemperatur: -20°C bis +120°C
Alle angegebenen Maße sind Circa-Maße und können geringfügig abweichen.
WEEE-Registrierungsnummer: DE33880481
The XT-60 connectors from Amass® are designed for high-current use, especially in model making. The connectors can be used to create safe and stable battery connections in housings, for example. This makes handling LiPos a little safer. The XT-60BE-F built-in socket can be protected with the protective cap provided when not in use. A protective cap is also included for the XT-60H connector. When using the protective cap, you do not need to insulate the soldering points with shrink tubing. At the same time, the protective cap also serves as a kink protection and thus reliably prevents soldering points and cables from breaking. The protective cap snaps securely and stably into the connector. So nothing needs to be glued.
Two matching screws and nuts are already included in the delivery. The screws can be screwed in completely. The screw heads do not touch. Please refer to the photos for the exact dimensions.
AMASS® is known as a manufacturer of very high-quality connectors.
Scope of delivery:
1 piece XT-60BE-F built-in socket (gold-plated contacts) with solder connection
1 piece protective cap for XT-60BE-F
1 piece XT-60H plug (gold-plated contacts) with solder connection
1 piece protective cap for XT-60H
2 pieces countersunk screws
2 pieces nuts
Technical data:
Hole spacing: 25.4mm
Set weight: approx. 15g
Color/material: orange PA nylon
Contacts: copper core, gold-plated
RoHS compliant: Yes
Contact resistance: 0.4mΩ
Insulation resistance: 2000MΩ
Flame resistance: UL94 V0
Nominal voltage: max. DC 500V
Nominal current: max. 30A
Peak current: max. 60A for 1 minute
Plug-in cycles: 1000 times
Recommended soldering temperature: ~480°C
Storage temperature: -20°C to +120°C
All dimensions given are approximate and may vary slightly.
WEEE registration number: DE33880481
Dieses Formular ist durch Aimy Captcha-Less Form Guard geschützt